To Next Page

To Previous Page

5-285-28

5-28

Chapter 5: Software supportChapter 5: Software support

Chapter 5: Software support

Channel 0 Interrupt: B I/P Port: 0000AC00

Channel 1 Interrupt: B I/P Port: 0000A800

[ RAID Card Configuration ]

[ RAID Card Resource ]

Auto-Rebuild: Enable

∗ : Capacity (GB) Drive Mode: P = PIO, D = DMA, U = UDMA

[→,←,Space] Change Option [ESC] Exit

Channel Size Drive

ID Drive Name (MB) Array No Mode

Pri/D0 XXXXXXXXXXXXXX XXXXXX Array 0 U5

Pri/D1 XXXXXXXXXXXXXX XXXXXX Array 0 U2

Sec/D0 XXXXXXXXXXXXXX XXXXXX Array 0 U4

Sec/D1 XXXXXXXXXXXXXX XXXXXX Array 0 U6

[ Drive Status ]

3. Use the up or down arrow keys to select a drive, then press <Enter>.

Follow succeeding screen instructions.

4. Press <Esc> to exit.

Viewing your RAID configurationViewing your RAID configuration

Viewing your RAID configuration

This option allows you to view your RAID configuration. You can also enable

or disable the Auto-rebuild function in this section.

To view your RAID configuration:

1. From the IT8212 Setup Utility screen, press <5>. The following screen

appears.

3. Use the left or right keys or the space bar enable or disable the

Auto-rebuildAuto-rebuild

Auto-rebuild item.

4. Press <Esc> to exit.

Asus P5GD2 User Manual

Other manuals for Asus P5GD2