Asus P5Q-E User Manual

ASUS P5Q-E 4-49
Using Drive Xpert function in BIOS setup environment
You may use Drive Xpert function in BIOS setup environment. To enter BIOS
setup, press DEL key after powering on. Drive Xpert conguration options are
under Tools menu.
Before using the Drive Xpert function, ensure that you have back up all your
data in your hard disks.
• EZ Backup erases all original data in the hard disk connected to the
SATA_E2 (white, port 1) connector on the motherboard.
• Super Speed erases all original data in both hard disks.
Drive Xpert Control [Auto]
This item allows you to enable or disable the Drive Xpert function.
Conguration options: [Auto] [Enabled] [Disabled][Auto] [Enabled] [Disabled][Enabled] [Disabled]
Drive Xpert Mode Update [Last Setting]
This item appears only when you set Drive Xpert Control to [Auto] or
[Enabled]. Set this item to [Mode Change] to show further settings of the
Drive Xpert function. Conguration options: [Last Setting] [Mode Change]
The following items appear only when you set Drive Xpert Mode Update to
[Mode Change].
Update To Super Speed [Press Enter]
This item allows you to use Super Speed function. Plug two identical SATA hard
drives in the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors onSATA_E2 (white, port 1) connectors on
the motherboard and press the <Enter> key.and press the <Enter> key.
Update To EZ Backup [Press Enter]
This item allows you to useallows you to use EZ Backup function. Plug two identical SATA hard. Plug two identical SATA hard
drives in the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors onSATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors on connectors onconnectors on
the motherboard and press the <Enter> key.and press the <Enter> key.
Update To Normal Mode [Press Enter]
This item allows you to use the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1)the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1)
connectors as normal SATA connectors. as normal SATA connectors.
When using one hard disk in Normal Mode, connect the hard disk to the
SATA_E1 (orange, port 0) connector on the motherboard.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
ASUS EZ Flash 2
Drive Xpert Control [Auto]
Drive Xpert Mode Update [Mode Change]
Update To Super Speed [Press Enter]
Update To EZ Backup [Press Enter]
Update To Normal Mode [Press Enter]
Express Gate [Enabled]
Enter OS Timer [10 Seconds]
Reset User Data [No]
ASUS O.C. Prole
AI Net 2
Press ENTER to run
the utility to select
and update BIOS.
This utility doesn't
support :
1.NTFS format

Asus P5Q-E Specifications

General

Non-ECC	Yes
Number of memory slots	4
Maximum internal memory	16 GB
Processor socket	LGA 775 (Socket T)
Processor manufacturer	Intel
Number of COM connectors	1
Number of SATA connectors	6
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	2
Audio chip	ADI AD2000B
Audio output channels	7.1 channels
Motherboard form factor	ATX
BIOS memory size	16 Mbit
RAID levels	0, 1, 10

Weight and Dimensions

Depth	244 mm
Width	305 mm