6
ASUS PhysX
TM
Installation Guide
English
1. ASUS
®
PhysX
TM
installation
1.1 Installation requirements
To ensure a successful installation of the PhysX card, your computer must
meet the following requirements:
(Note: The games the customers may buy may have higher specications. The
specications below are subject to change without notice.)
• Intel
®
Pentium
®
4, Intel
®
Celeron
®
or higher, AMD
®
Athlon
TM
64, AMD
®
Sempron
TM
or AMD
®
Athlon
TM
XP or higher
• Microsoft
®
Windows
®
XP/Professional/Home (32bit Edition), with SP1
or later upgrade
• 256MB system memory or higer
• Geforce6800, Radeon X800 graphic card or higher is recommended for
most games
• 50MB free hard disk space or greater
• PCI Slot revision 2.2 or later, 3.3V
• Free 4-pin Peripheral Power Cable
Before the installation, check your ASUS PhysX card package for the following
items:
• ASUS PhysX
TM
PPU card
• ASUS PhysX
TM
PPU support CD
• Product serial number
• CD serial number
When the above items are ready, you can begin the installation that includes
two steps: (1) card installation, and (2) driver installation.
1.2 Card installation
To install ASUS PhysX card:
1. Touch the metal back or side panel of the computer to avoid static
electricity.
2. Power OFF the computer, the monitor, and all other peripheral devices
connected to your computer.
3. Unplug the computer power cord from your computer and power outlet.
4. Remove the chassis cover.
5. Locate an empty PCI slot on the motherboard.
To Next Page
Need help?
General
