Asus RT-N10P User Manual

44
User name: admin
Password: admin
Enable DHCP: Yes (if WAN cable is
plugged in)
IP address: 192.168.1.1
Domain name: (Blank)
Subnet Mask 255.255.255.0
DNS Server 1: 192.168.1.1
DNS Server 2: (Blank)
SSID: ASUS
Howdoyourestorethesystemtoitsdefaultsettings?
• Press the Reset button at the rear panel of the wireless
router for more than five seconds.
• Refer to the section
Restoring/Saving/Uploading settings
of this user manual.
The following are the factory default settings:

Asus RT-N10P Specifications

General

VPN support	IPSec Pass-Throuth\\r PPTP Pass-Through\\r L2TP Pass-Through
Ethernet LAN	Yes
Networking standards	IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	5
DHCP client	-
Antennas quantity	1
Antenna gain level (max)	5 dBi
Frequency band	2.4 GHz
Filtering description	IP, URL
Security algorithms	128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK, WPS
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	124 mm
Width	168 mm
Height	30 mm
Weight	210 g