7
E. & O.E. The policy of Loudspeaker Technology Ltd. is that of continuous design and development. We reserve the right to change
specifications without prior notice.
Specifications
Pre-Amplifier
Maximum Output Level: Phono 9.2V r.m.s.
XLR 18.4V r.m.s.
Line Input Sensitivity: 640mV (for 2V output)
Input Impedance:
13k8 Ohms
Output Impedance: 10 Ohms
Frequency Response: < 2Hz – > 280kHz (@ -3dB)
Total Harmonic Distortion: 1kHz <0.001% (-100dB)
10kHz <0.0015% (-96 dB)
50kHz <0.002% (94dB)
Crosstalk: >90dB (10Hz – 20kHz)
S+N/N Ratio: > 97dB (Wide band)
> 105dB (DIN)
> 110dB (IEC “A”)
Overload Capacity: 13dB
Absolute Phase: Phono Zero Degrees
XLR Zero Degrees, Pin 2 Hot
XLR CMRR: >60dB (100Hz – 10kHz)
CD Player
Distortion: 1kHz <0.002% (-94dB)
10kHz <0.003% (-90dB)
Frequency Response (+/- 0.1dB): 20Hz – 20kHz
S+N/N Ratio: >100dB (IEC “A”)
Digital Inputs
Distortion: 1kHz <0.003% (-90dB)
10kHz <0.005% (-86dB)
Frequency Response (+/- 0.1dB): 20Hz – 20kHz
S+N/N Ratio: >96dB (IEC “A”)
Word Lengths Supported: 16 – 24 Bit
Sample Rates Supported: 44.1kHz, 48kHz, 88.2kHz, 192kHz
CDA2
CD Player & Preamplifier
Physical
Dimensions: 90 x 445 x 330mm / 3.54 x 17.52 x 12.99"
( H x W x D)
Weight: 7.1kg/15.7lbs
Mains Power
Voltage: 115/230V AC 50/60Hz (internally
selectable). 100v AC via dedicated
transformer. Mains voltage selection is to
be carried out by ATC only.
Maximum Power Consumption: 30VA
To Next Page
Loading...
Need help?
General
