ATCOM A10 Quick Start Guide

A10/A11/A10W/A11W Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
Account Setting:
Press Menu- input default password 123- SIP Account- Enter to configure the
account setting. You can refer to the bellow ‘Configuring via Web page’ for the
parameter details.
2.2 Configuring via Webpage
2.2.1 Login to web
Modify your computer’s IP address to the same network as A11(0)/A10W. Enter
A11(0)/A10W’s IP address in the web browser and press Enter, then you will
access to A11(0)/A10W's user webpage without password.
Click ‘admin’ which is on the right corner to enter administrator webpage.
2.2.2 Configure phone to register SIP account
a) LAN Port Configuration
Enter "Network" -> "Basic" page.
There are 2 ways to connect to internet DHCP and Static , please choose one
according to your own situation.
9 Network mode: you can choose DHCP and Static.
9 DHCP: A10/A11/A10W/A11W default to use DHCP to obtain IP from DHCP

ATCOM A10 Specifications

General

Brand	ATCOM
Model	A10
Category	IP Phone
Language	English