Ather APEX User Manual

REGENERATIVE BRAKING
Recover the scooter’s kinetic energy and convert it
to be stored in the battery. For regenerative braking
to work as intended, battery level is recommended
to be below 80%.
HOW TO ACTIVATE IT?
Press the brake levers or rev the throttle in the
opposite direction (anti-clockwise). Algorithms
dictate the amount of regen, depending on the
battery state and speed of the scooter.
REGEN DISABLED
Regen is disabled when the charge status is high
(higher the remaining range, lesser the regen) or
when the battery temperature is high.
CAUTION
The scooter can't be brought to a halt using coasting
or braking induced regenerative braking as the
regen effect tapers below 20 km/h.
27
On the road

Ather APEX Specifications

General

Brand	Ather
Model	APEX
Category	Scooter
Language	English