Atlas Copco Cobra mk1 Operator's Handbook

20
Rock splitting
Using a motorized drill/breaker, you can split large rocks
safely and accurately.
Start by drilling holes in a straight line across the rock
you want to split. The holes should be about 30-40 cm
(12”-16”) apart and at least 40 cm (16”) deep.
Insert feathers and wedges along the line. Drive in each
wedge a little at a time until the rock splits. Some grease
applied to the wedges makes the job easier.

Atlas Copco Cobra mk1 Specifications

General

Brand	Atlas Copco
Model	Cobra mk1
Category	Power Tool
Language	English