Maintenance, precautions
WARNING Machine modification
Any machine modification may result in bodily injuries
to yourself or others.
► Never modify the machine. Modified machines are
not covered by warranty or product liability.
► Always use original parts and accessories
approved by Atlas Copco.
► Change damaged parts immediately.
► Replace worn components in good time.
WARNING Accessory hazards
Accidental engagement of accessories during
maintenance or installation can cause serious
injuries, when the power source is connected.
► Never inspect, clean, install, or remove
accessories while the power source is connected.
Storage, precautions
CAUTION Hot working tool
The tip of the working tool can become hot and sharp
when used. Touching it can lead to burns and cuts.
► Never touch a hot or sharp working tool.
► Wait until the working tool has cooled down before
carrying out maintenance work.
♦
Keep the machine and tools in a safe place, out
of the reach of children and locked up.
© 2015 Construction Tools EOOD | No. 3392 5036 01f | 2015-03-10
Original instructions
10
LPD T, RVSafety and operating instructions
To Next Page
Loading...
Need help?
General
