To Next Page

To Previous Page

LUM12 PR EN Safety and operating instructions

Brand

General purpose

Bearings Air Lubrication

Shell Alvania EP2 Tonna R32

Texaco / Preem Multifak EP2 Aries 32

Brand Clutch / Gears Angle gears

Molycote Longterm 2 Plus

Lub. engineers LE 3752

except, see Clutch in exploded views

Reporting, RE - signal

Reporting (RE) machines supply an air signal that can be connected to a moni-

toring instrument that counts the number of approved tightening and detects

premature shut-off and rehits and other irregularities.

Useful information

You can find information concerning our products, accessories, spare parts and

published matters on our website.

Ergonomic guidelines

Consider your workstation as you read through this list of general ergonomic

guidelines and see if you can identify areas for improvement in posture, compo-

nent placement, or work environment.

• Take frequent breaks and change work positions frequently.

• Adapt the workstation area to your needs and the work task.

• Adjust for convenient reach range by determining where parts or tools

should be located to avoid static load.

• Use workstation equipment such as tables and chairs appropriate for the

work task.

• Avoid work positions above shoulder level or with static holding during as-

sembly operations.

• When working above shoulder level, reduce the load on the static mus-

cles by reducing the weight of the tool, using for example torque arms,

hose reels or weight balancers. You can also reduce the load on the static

muscles by holding the tool close to the body.

• Make sure to take frequent breaks.

• Avoid extreme arm or wrist postures, particularly for operations requir-

ing a degree of force.

• Adjust for convenient field of vision by minimizing movement of the eyes

and head during the work task.

• Use the appropriate lighting for the work task.

• Select the appropriate tool for the work task.

Atlas Copco LUM12 PR Series User Manual

Questions and Answers: