Atlas Copco QST42-20CT-T50-L134-H10 User Manual

Installation EN QST42-20CT-T50-L134-H10
6
© Atlas Copco Industrial Technique AB - 9839 1166 01
Installation
Installation requirements
Motor connector
The motor connector is rotatable ± 150 degrees along two axes.
Clamping
No clamping is allowed on the transducer, the gear unit or the motor unit. Clamping on these areas will in-
terfere with the transducer.
Compression spring
The QST nutrunners are delivered with two springs. The strong spring is built in the front part.

Atlas Copco QST42-20CT-T50-L134-H10 Specifications

General

Brand	Atlas Copco
Model	QST42-20CT-T50-L134-H10
Category	Power Tool
Language	English