5
Safety instructions
To reduce the risk of serious injury or death to yourself or others, carefully read
through this instruction booklet before putting the rock drill to use. Always follow
the instructions given.
h Always wear a safety helmet, goggles and ear protectors with CE mark during
drilling. Any local regulations that exist must also be observed.
h When drilling in certain minerals, there is a risk of spark generation. Before
starting work, check that the machine is approved (in accordance with local
regulations) for work under such conditions.
h Always take great care when using the machine. The working tool is subjected to
heavy loading and can break, with a risk of injury to personnel.
h Check that the hoses used are of the right quality, and that all hose connections
are in good condition and properly tightened.
h Before starting work on any of the systems, make sure that the air and water
systems are without pressure.
h Make sure that there are no concealed wires or other sources of electricity. Never
drill near any electric wires or other sources of electricity.
5
To Next Page
Loading...
Need help?
General
