AudioCodes MediaPack MP-11 Series Configuration Note

Configuration Note 18 Document #: LTRT-30302
Restoring Factory Defaults
4.5 Mediant 4000
The procedure below describes how to reset Mediant 4000 to default settings using the
hardware reset button.
 To reset the Mediant 4000:

With a paper clip or any other similar pointed object, press and hold down the reset
button for at least 1 second, but no longer than 10 seconds.
 To restore Mediant 4000 to factory defaults:

With a paper clip or any other similar pointed object, press and hold down the reset
button for at least 11 seconds, but no longer than 20 seconds.
Figure 4-7: Reset Pinhole Button on Mediant 4000

AudioCodes MediaPack MP-11 Series Specifications

General

Brand	AudioCodes
Model	MediaPack MP-11 Series
Category	Gateway
Language	English