AUX DC Inverter Free Match 50HZ R32
125
7.
"Child Lock" function display
Press both"
" or "
" buttons for more than 5S to enter locking, the controller will display
" " . In the state of locking, operations on the wired controller are disabled (but remote control
receiving is valid).
The method of unlocking: Press both"
" or "
" buttons for more than 5S or power off the
unit to release the locking (" " does not display).
8.
Remote control
function
The wired controller can receive remote control commands and update the current status
Start-up the unit with remote controller, wired controller work in accordance with the state set
on the remote controller and displays corresponding working mode;
9. Room temperature sensor equipped on the wired controller
When the wire controller is equipped with a room temperature sensor and the sensor is not
damaged, it is default that the ambient temperature detected by the sensoron the controller and
the temperature value will be sent to the main PCB of the unit.
If the wire controller is not equipped with a room temperature sensor or the sensor is
damaged, the room temperature will be detected by the temperature sensor of the unit itself.
10.Fault display
When the unit has fault, the time bar will directly display the fault code and flash, the display
mode is Er: MM (MM is the fault code, please read the corresponding roduct manual).
Basic condition of wired controller
Basic condition for operation
To Next Page
Loading...
Need help?
General
