SN
Lo
θ1
θ2
Display receive
Blue
Black
Y/G
Brown
Duster
Electrostatic
High Voltage
L
Red
NOTE:if used as MONO unit, for the standby control needs, the cross section area of cable connected to L,Lo,N,S
must be sufficient for the maximum system current. The maximum system current is equal to the sum of indoor
unit and outdoor unit rated current if used as MULTI unit Lo on the terminal block does not need to be connected.
L-IN
To Outdoor Unit
Sensor
Temperature
Controlling board
Step Motor
Step Motor
Panel
Wifi
Module
AC Fan Motor
generator
Anion
Force Switch
Indoor Unit Electric Chart
DC Fan Motor
Some models have no content
inside dashed frame.
FUSE
3.15A 250V