EasyManuals Logo
Home>Azbil>Security Sensors>AUD100 Series

Azbil AUD100 Series User Manual

Azbil AUD100 Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
E1
CP-UM-5713JE
AUD100 Series Advanced Ultraviolet
Flame Detector
AUD120 Socket for the AUD15 Tube Unit
User's Manual
AUD120C120_ AUD120C121_
Thank you for purchasing the products.
This manual contains information for ensuring correct use of the
products. It also provide necessary information for installation,
maintenance, and troubleshooting.
This manual should be read by those who design and maintain
devices that use the products.
Be sure to keep this manual nearby for handy reference.
Please, read Terms and Conditions from following URL before
the order and use.
http://www.azbil.com/products/bi/order.html
NOTICE
Be sure that the user receives this manual before the product is used.
Copying or duplicating this user’s manual in part or in whole is for-
bidden. The information and specifications in this manual are sub-
ject to change without notice.
Considerable effort has been made to ensure that this manual is
free from inaccuracies and omissions. If you should find an error or
omission, please contact the azbil Group.
In no event is Azbil Corporation liable to anyone for any indirect,
special or consequential damages as a result of using this product.
© 2012-2016 Azbil Corporation All Rights Reserved.
OVERVIEW
e AUD120 is a dedicated socket for the AUD15 tube unit (sold sepa-
rately), which is designed for monitoring the ame of oil or gas burn-
ers in batch operation.
e socket has improved environmental resistance and is simple to use.
is product is 1/2 inch type.
SAFETY PRECAUTIONS
Safety precautions are for ensuring safe and correct use of this
product, and for preventing injury to the operator and other
people or damage to property. You must observe these safety
precautions. Also, be sure to read and understand the contents
of this user's manual.
Warnings are indicated when mishandling this product
might result in death or serious injury to the user.
WARNING
Cautions are indicated when mishandling this product
might result in minor injury to the user, or physical damage
to this product.
CAUTION
Warnings are indicated when mishandling this product
might result in death or serious injury to the user.
WARNING
Cautions are indicated when mishandling this product
might result in minor injury to the user, or physical damage
to this product.
CAUTION
WARNING
Before removing, mounting or wiring, be sure to turn o
the power to this product and any connected devices.
Failure to do so may result in an electric shock.
This device must be used with combustion equipment
that starts and stops at least once every 24 hours.
This device cannot be used with combustion equipment
that operates continuously for 24 hours or longer.
Use this device only in combination with Azbil Corpora-
tion’s burner controllers.
CAUTION
Installation, wiring, maintenance, inspection, adjust-
ment, and the like of the AUD15 and AUD120 should be
carried out only by a trained and experienced techni-
cian who has knowledge and technical skills related to
combustion equipment and combustion safety devices.
Do not transport the AUD15 while it is mounted on the
combustion equipment. Impact or vibration during
transport may cause it to malfunction. Before trans-
porting, dismount it and put it in its original shipping
box.
Be sure to route the ame signal wires of this device
separately from high-voltage ignition transformer
cables and power cables, and put them in a separate
conduit.
The eective operating life of the AUD15 is a total of
25,000 hours of use or 5 years after the date of inspec-
tion by Azbil Corporation. Be sure to replace it with a
new AUD15 within this period.
A label for management of the eective operation time
is included with the AUD120. Please make use of it for
maintenance purposes.
MODEL NUMBER AND CERTIFICATION
Model number
Model numbers for the AUD120 are as follows:
Model No. Description
AUD120C120_
Without a wiring conduit adapter
AUD120C121_
With an adapter for a G 1/2 wiring conduit
_: 0: Standard product
D: With inspection results (with data)
(sold separately)
Model No. Description
AUD15C1 _ _ _ Tube unit for the AUD100/110/120
Certification
UL: File No. MH27717
Gas Appliance Directive (CE):
Certication accompanies the connected controller
(CE logo is printed on the controller).
UNPACKING
Check for the following items when unpacking the AUD120. If there
is any problem with your order, please contact your dealer promptly.
Contents of the box (1 each)
• AUD120
User’s manual No. CP-UM-5713JE (this document)
Eective operation time label

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Azbil AUD100 Series and is the answer not in the manual?

Azbil AUD100 Series Specifications

General IconGeneral
BrandAzbil
ModelAUD100 Series
CategorySecurity Sensors
LanguageEnglish

Related product manuals