Wheels - Tube Less Tyre
CAUTION : Tubeless tyres are fitted in this
motorcycle. The walls of the tyres in
contact with the wheel rim should not be
damaged in any way during fitment /
removal of tyre. The tyre side walls in
contact with wheel rim seals air.
Wheel Puncture :
• Visit nearest known tubeless tyre repair
shop to remove puncture.
• Remove puncture by Filler or Plug method
only.
• Do not use patch method to remove
puncture of tubeless tyre.
Tyre Pressure :
Keep appropriate tyre pressure as mentioned
below to increase life of the tyre & for better
fuel consumption.
Note : Ensure tyres fitted comply with local
rules and regulations governing tyres.
Front 25 PSI
Pulsar 200 NS/AS Rear (Solo) 28 PSI
Rear (with Pillion) 32 PSI
Front Wheel
Removing Front Wheel :
• Park vehicle perpendicular to the ground on
level surface as mentioned in page no. 21
(6.1)
• Remove speed sensor cable from case meter
assembly.
• Loosen front axle nut.
• Remove front wheel assembly from fork.
27
To Next Page
Loading...
Need help?
General
