1.1 Description
1. The Baxi Solo HE range are gas fired room sealed fan
assisted condensing central heating boilers.
2. The maximum output of the Baxi Solo 12 HE is 40,330
Btu/hr, 15 HE is 52,000 Btu/hr, 18 HE is 60,770 Btu/hr, 24
HE is 75,000 Btu/hr. The maximum output of the 30 HE is
preset at 75,000 Btu/hr but can be set to 100,000 Btu/hr
(see section 10.8). All boilers automatically adjust their
outputs according to the system load.
3. It is designed for use on Natural Gas (G20).
4. The boiler is suitable for fully pumped open vented
central heating and domestic hot water systems and
sealed systems.
5. A label giving details of the model, serial number and
Gas Council number is situated on the rear of the lower
door panel (Fig. 1).
6. The boiler data badge is positioned on the air box door
(Fig. 2).
7. The boiler is intended to be installed in residential /
commercial / light industrial E.M.C. environments on a
governed meter supply only.
8. The boiler must be installed with one of the purpose
designed flues such as the standard horizontal flue kit, part
no 236921.
1.2 Important Information
Man-made mineral fibre
• Some component parts of this appliance (insulation
pads, gaskets and rope seals) are manufactured from man-
made mineral fibre.
• Prolonged or excessive exposure to this material may
result in some irritation to the eyes, skin or respiratory
tract.
• It is advisable to wear gloves when handling these items.
• Irritant dust will only be released from the items if they
are broken up or subjected to severe abrasion. In these
instances a suitable dust mask and goggles should be
worn.
• Always thoroughly wash hands after installation,
servicing or changing components.
• When disposing of any items manufactured from man-
made mineral fibre care must be exercised.
• If any irritation of the eyes or severe irritation of the skin
is experienced seek medical attention.
1.0 Introduction
7
© Baxi Heating UK Ltd 2006
Fig. 1
Data Badge
Air Box Door
Lower Door Panel
Position of Label
Fig. 2