Product overview
CX9000 / CX901010 Version: 2.6
2.3 Basic modules
The CX90xx is a compact, top hat rail-mountable Ethernet Controller with direct connection to the Beckhoff I/
O systems in IP 20. The CX90xx is available in two basic versions: one version for Bus Terminals with K-
bus, the other one for EtherCAT Terminals with E-bus. The CX9000 comprises the CPU, the internal flash
memory with two configuration options, the main memory (RAM) (available in two different sizes), and
NOVRAM as non-volatile memory. In opposite to the CX9000 the CX9010 is only available with 32 MB flash
memory, 128 MB main memory (RAM). Two Ethernet RJ 45 interfaces are also part of the basic
configuration.
These interfaces are connected to an internal switch and offer a simple option for creating a line topology
without the need for additional Ethernet switches. A memory medium in Compact Flash format I and II is
available as an optional module (only in combination with system interface CX9010-N010). The operating
system is Microsoft Windows CE. The TwinCAT automation software transforms a CX90xx system into
powerful PLC and Motion Control system that can be operated with or without visualization.
Further system interfaces can be connected to the CPU module ex works. The CX90xx-N010 option can be
connected to Beckhoff Control Panels or standard monitors with DVI or VGA input via the DVI and USB
interfaces. Devices such as printer, scanner, mouse, keyboard, mass storage, CR-RW etc. can be
connected via the USB2.0 interfaces. The module CX90xx-N030 offers two serial RS232 interfaces with a
maximum transfer speed of 115 kbaud. These two interfaces can be implemented as RS422/RS485, in
which case they are identified as CX90xx-N031.
To Next Page
Loading...
Need help?
General
