23
B-CONTROL AUDIO BCA2000
6.4 MIDI connectors
The MIDI connectors on the rear panel feature the internationally
standard 5-pin DIN connectors. To connect the B-CONTROL to
other MIDI devices, you need a MIDI cable. In general, commercially
available cables can and should be used. Their length should not
exceed 5 m (15 ft.).
MIDI IN: This connector is used for receiving MIDI data.
MIDI OUT A/B: Data for controlling other MIDI equipment can be
sent through the MIDI outputs.
MIDI THRU: MIDI OUT B can be configured as MIDI THRU in the
control panel software, allowing any data received via the
MIDI IN to be passed on without being modified.
7. SPECIFICATIONS
AUDIO INPUTS
Microphone inputs (IMP Invisible Mic Preamp)
Type XLR balanced
Gain range +10 to +60 dB
Frequency response 10 Hz - 200 kHz (-3 dB)
Impedance approx. 2.2 kW (balanced)
Max. input level +10 dBu (@ +10 dB Gain)
Signal-to-noise ratio 108 dB (112 dB A-weighted)
Distortion (THD+N) 0.005 % (0.004 % A-weighted)
Line inputs (2)
Type ¼" TRS connector, balanced
Gain range -10 to +40 dBu
Impedance approx. 20 kW (balanced)
Max. input level +26 dBu (@ 0 dB Gain)
Guitar input (1)
Type ¼" TS connector
Gain range -10 to +40 dBu
Impedance approx. 1 MW
Max. input level +20 dBu (@ 0 dB Gain)
AUDIO OUTPUTS
Control Room L/R
Type ¼" TRS stereo
Impedance approx. 120 W
Signal-to-noise ratio 115 dB
Crosstalk -80 dB @ 1 kHz
Max. output level +20 dBu
Main Out
Type (Main 1/2, Cinch 3-6)
Impedance approx. 120 W
signal-to-noise ratio 100 dB
Crosstalk < -80 dBu @ 1 kHz
Max. output level +20 dBu
Headphones outputs (2)
Type ¼" TRS connector with separate
volume controls
Max. output level +20 dBu
INSERTS (2)
Type ¼" TRS connector, unbalanced
DYNAMIC SECTION
Noise Gate Threshold -¥ to 0 dB
Limiter Threshold -15 to 0 dB
7. SPECIFICATIONS
DIGITAL INPUTS
Type Cinch coaxial
Standard AES/EBU, S/PDIF
Input impedance 75 W
Nom. input signal level 0.2 - 5 V peak-to-peak
Type TOSLINK optical
Standard AES/EBU, S/PDIF, ADAT
®
, S/MUX
DIGITAL OUTPUTS
Type Cinch coaxial
Standard AES/EBU, S/PDIF, AC-3/DTS
®
Impedance 75 W
Output signal level 2.5 V peak-to-peak
Type TOSLINK optical
Standard AES/EBU or S/PDIF, AC-3/DTS
®
, ADAT
®
,
S/MUX
DIGITAL PROCESSING
Converter 24 Bit/96 kHz
Sample rate 44.1 kHz, 48 kHz, 96 kHz
Signal-to-noise ratio A/D: 100 dB typ.
D/A: 102 dB
USB INTERFACE
Type High-Speed 480 MBit/s
Full-Speed 12 MBit/s
MIDI INTERFACE
Type 5-pin DIN connectors: IN, OUT A,
OUT B/THRU
POWER SUPPLY
Voltage 100 - 240 V~, 50/60 Hz
Power consumption max. 15 W
Fuse T 1 A H 250 V
Mains connection Standard IEC receptacle
DIMENSIONS/WEIGHT
Dimensions
(W x H x D) 13" x 4" x 11 4/5"
(330 mm x 100 mm x 300 mm)
Weight approx. 5 lbs (2.25 kg)
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
To Next Page
Loading...
Need help?
General
