Behringer CHORUS ORCHESTRA CO600 User Manual

CHORUS ORCHESTRA CO600
Ultimate Stereo Chorus Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER CHORUS ORCHESTRA CO600.
This ultimate eects pedal is designed to suit almost any style of music you can think of. Thanks to its
high-performance features you get a thick and orchestral stereo chorus eect.
The chorus eect adds a shifting detuned signal to the original, similar to playing in unison in a
group of instruments, and it is often used for dispersing sounds.
1. Controls
(1) The LEVEL control adjusts the eect sound level.
(2) The RATE control determines the chorus eect speed.
(3) The HIGH control lowers the amount of high frequencies in the eect signal.
(4) The LOW control lowers the amount of ultra-low frequencies in the eect signal.
(5) Turn up the DEPTH control to achieve a fuller and deeper eect sound.
(6) The ON/BATT LED illuminates when the eect is activated. It also serves as a
battery level indicator.
(7) Use the footswitch to activate/deactivate the eect.
(8) Use this ¼" TS IN connector to plug in the instrument cable.
(9) The two ¼" TS OUT A and OUT B connectors send the signal to your amp. Use both connectors
if you want to achieve full stereo chorus eect. For mono use plug in OUT A only.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
(1) (5)
(4)
(7)
(8)
(9)
(6)
(2) (3)

Behringer CHORUS ORCHESTRA CO600 Specifications

Power

power supply voltage	9 V
power supply current	100 mA
battery type	9 V type 6LR61

Ports & Interfaces

input connector	1/4" TS
output A connector	1/4" TS
output B connector	1/4" TS

Electrical Characteristics

input impedance	500 kΩ
output A impedance	1 kΩ
output B impedance	1 kΩ

Weight and Dimensions

dimensions	54 x 70 x 123 mm
weight	0.33 kg