Behringer ULTRA CHORUS UC200 User Manual

ULTRA CHORUS UC200
Ultimate Stereo Chorus Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA CHORUS UC200.
This ultimate eects pedal is designed to deliver super-thick chorus with unbelievable stereo eect.
Thanks to its high-performance features you’ll have full parameter control for absolute exibility and
limitless creative options.
The chorus eect slightly detunes the original signal. A very pleasant detune eect is created in connection
with the pitch variation. The chorus eect is used often and quite extensively used for dispersing signals.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The TONE control allows you to adjust the overall eects sound and achieve a more dened and
brilliant tone.
(3) The RATE control determines the chorus eect speed.
(4) Turn up the DEPTH control to achieve a fuller, deeper eect sound.
(5) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS IN connector to plug in the instrument cable.
(8) The two ¼" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if
you want to achieve full stereo chorus eect. For mono use just plug in OUT A.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,
press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
(5)
(1)
(6)
(7)
(3)(2)
(4)
(8)

Behringer ULTRA CHORUS UC200 Specifications

Power

power supply voltage	9 V
power supply current	100 mA
battery type	9 V type 6LR61
power consumption	30 mA

Ports & Interfaces

input connector	1/4" TS
input impedance	500 kΩ
output A connector	1/4" TS
output A impedance	1 kΩ
output B connector	1/4" TS
output B impedance	1 kΩ

Weight and Dimensions

dimensions	54 x 70 x 123 mm
weight	0.33 kg