Behringer MicroPHONO PP400 User Manual

MICROPHONO PP400
Welcome to Behringer
Thank you for showing your condence in us by purchasing the
Behringer MICROPHONO PP400, a compact phono preamplier.
Turntables have low-level signals. However, most audio units can only
process line-level signals. Between a turntable and another audio
unit (a mixer, an amplier, or a recording unit), the PP400 acts as an
intermediary, as follows:
1. The PP400 equalizes a turntable signal according to RIAA
specications.
2. The PP400 amplies the RIAA equalized signal.
3. The PP400 outputs a line-level signal.
◊
◊ Please read the safety instructions that appear at the
end of this document.
Connectors and Control Elements
This section illustrates and describes each PP400 connector and control element.
Fig. 1: PP400 connectors and control elements
V 5.0
(2)
(1)
(5)(3) (4)
A50-00002-78890

Behringer MicroPHONO PP400 Specifications

Input Specifications

input impedance	47 kW
maximum input level	-23.5 dBV @ 1kHz

Output Specifications

output impedance	50 W
maximum output level	+11.5 dBV @ 1 kHz

System Specifications

frequency response	RIAA
THD	0.06% typ. @ -40 dBu/1 kHz
gain	35 dB
signal-to-noise ratio	68 dBu @ 0 dBu, A-weighted
input sensitivity	5.3 mV @ 1 kHz

Power Supply

mains connection	external power supply, 12 V? / 150 mA
power consumption	1.5 W

Dimensions and Weight

dimensions (H x D x W)	32 x 103 x 64 mm
weight	0.180 kg