Behringer XENYX 302USB User Manual

Specications
26
XENYX 302USB
Mic Input
Microphone Input
Type XLR/¼" combo connector, electronically balanced
Mic E.I.N.
1
(20 Hz - 20 kHz)
@ 0 source resistance -130 dB / -133.1 dB A-weighted
@ 50 source resistance -128 dB / -131.5 dB A-weighted
@ 150 source resistance -127 dB / -129.8 dB A-weighted
Frequency response (–1 dB) 18 Hz - 40 kHz
Frequency response (–3 dB) < 10 Hz - 75 kHz
Gain range +15 dB to +55 dB
Max. input level +12 dBu @ +10 dB Gain
Impedance 2 k
Signal-to-noise ratio 98 dB / 101 dB A-weighted (0 dBu in @ +22 dB Gain)
Distortion (THD+N) 0.013%
Frequency Response (Mic In Main Out)
18Hz - 40kHz +0 dB / -1 dB
10Hz - 75kHz +0 dB / -3 dB
Stereo Line Input
Type RCA jacks, unbalanced
Impedance 6 k
Gain range -∞ to +20 dB
Max. input level +20 dBu
2-Track In
Type RCA jacks, unbalanced
Impedance 20 k
Max. input level +20 dBu
Headset Mic In
Type ⁄" TRS mini jack
Impedance 6 k
Max. input level +22 dBu @ Gain Min
Equalizer
Low 80 Hz / ±15 dB
High 12 kHz / ±15 dB
Main Outputs
Type RCA, unbalanced
Impedance 470 
Max. output level +22 dBu
Phones Output
Type ⁄" TRS mini jack
Max. output level +7 dBu / 150 

Behringer XENYX 302USB Specifications

Power

mains voltage	100-240 V, ~ 50/60 Hz
power consumption	0.9 W
power connector	USB, type A

Audio Specifications

frequency response (Mic In - Main Out)	18 Hz - 40 kHz +0 dB / -1 dB
frequency response	10 Hz - 75 kHz +0 dB / -3 dB
signal-to-noise ratio	98 dB / 101 dB A-weighted

Input/Output Impedance and Levels

mic input impedance	20 kΩ
mic max input level	+20 dBu
main output impedance	470 Ω

Weight and Dimensions

dimensions	1.8 x 4.5 x 5.4 in, 46 x 114 x 136 mm
weight	0.83 lbs / 0.38 kg