The boiler temperature
Only change the temperature if you are personally dissatisfied with the
result in the cup.
Many roasts need different brewing temperatures. Therefore we do
not give any values.
The temperature of the boiler can be adjusted. The following settings
can be selected:
Boiler temperature
Display
80 – 135
The preset value is 125 ° C.
The current boiler temperature is displayed during operation.
The right temperature for the coffee is an important criterion
for the quality of the taste and the crema:
94 °C
120 °C
90 °C (+/- 2°C)
– Water:
– Steam
– Espresso
– Milkfoam for Cappuccino
60 – 65 °C
Your Bellezza Francesca coffee machine has a highly accurate PID
temperature control so that you always achieve the optimum
temperature.
Use the following rule of thumb as a guide:
If the espresso is too cold for you - the temperature is high (feel your
way up slowly in 1 degree increments).
If the crema of the espresso is too light, the temperature is too high
(attention unless you use light roasts! Then ask your roaster for
information)
If they have a light roast - temperature often down
The ECO mode
The machine switches off automatically if there is no
operation during the set time interval. The following settings
can be selected:
Switch-off time Display
EC1
EC2
EC3
EC4
35
Minutes
60 Minutes
90 Minutes
180 Minutes
ECO-Mode off
EC5
The default value is EC1.
If the machine is in ECO mode, ECO is shown on the LCD display.
Switch the machine on again after it has switched off
automatically:
► Press the SET button on the LCD display or switch the
machine off and on again using the on / off switch.
18 / 32
Bellezza | Espresso machines
Understand the display and change settings
Steam 80 – 135 °C
To Next Page
Loading...
Need help?
General
