6
Do not plug in your vacuum cleaner until you are familiar with all
instructions and operating procedures.
Before using your vacuum, make sure that the dirt container is in the
locked position and that all filters are in place. Do not operate your
vacuum without all the filters properly secured.
CAUTION:
CAUTION:
!
!
1. Connect the Handle (1) with the
Integrated Extension Wand (13)
2. Stand the vacuum upright and slide
the base of the Integrated Extension
Wand firmly into the opening at the
top of the vacuum body
3. Press the Extension Wand
Adjustment Button (14) to adjust the
height of the Integrated Extension
Wand
1. Attach the Silicone-tipped Crevice
Tool (21) and the 2-in1 Pet
Upholstery Tool/Dusting Brush (18)
to their on-board storage areas
2. Attach the Handheld Pet Turbo
Brush Clip (3) to the front of the
handle
3. Attach the Handheld Pet Turbo
Brush (4) by lining it up with the
hook on the base of the Clip then
pushing it forward to click into
place
Attach handle to vacuum
Attach tools and accessories
ASSEMBLY:
1
1
2
Before plugging the power cord into the electrical outlet, make sure the
power switch on the wall plug is in the ‘off’ position.
Hold the vacuum cleaner firmly by the Handle when starting and during use.
2
3
3
To Next Page
Loading...
Need help?
General
