Name: BenQ XL2430T
Brand: BenQ
Rating: 4 (1 reviews)

To Next Page

To Previous Page

12 How to assemble your monitor hardware

You might want to adjust the monitor stand height.

See Adjusting the monitor height on page 19 for

more information.

You should position the monitor and angle the screen to

minimize unwanted reflections from other light sources.

2. Connect the PC video cable.

Do not use both DVI-D cable and D-Sub cable on the same

PC. The only case in which both cables can be used is if they

are connected to two different PCs with appropriate video

systems.

To Connect the D-Sub Cable

Connect the plug of the D-Sub cable (at the end

without the ferrite filter) to the monitor video

socket. Connect the other end of the cable (at the

end with the ferrite filter) to the computer video

socket.

Tighten all finger screws to prevent the plugs from

accidently falling out during use.

To Connect the DVI-D Dual Link Cable

Connect the plug of the DVI-D Dual Link cable to

the monitor video socket. Connect the other end of

the cable (at the end with the ferrite filter) to the

computer video socket.

Tighten all finger screws to prevent the plugs from

accidently falling out during use.

-5

~ +20

-5

~ +20

Either

Questions and Answers:

Need help?

Do you have a question about the BenQ XL2430T and is the answer not in the manual?

BenQ XL2430T Specifications

General