G41D-M7 BIOS Manual
26
North Bridge Configuration
BIOS SETUP UTILITY
Chipset
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
North Bridge Chipset Configuration
PEG Port Configuration
Memory Hole [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Internal Graphics Mode Select [Enabled,32MB]
PEG Port [Auto]
> Video Function Configuration
Memory Remap Feature [Enabled]
PCI MMIO Allocation:
IGD GTT Graphics memory size [No VT mode, 2MB]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Memory Remap Feature
This item allows you to enable or disable the remapping of the overlapped PCI
memory above the total physical memory. Only 64-bit OS supports this function.
Options: Enabled (Default) / Disabled
Memory Hole
You can reserve this area of system memory for ISA adapter ROM. When this area
is reserved it cannot be cached. Check the user information of peripherals that need
to use this area of system memory for the memory requirements.
Options: Disabled (Default) / 15MB – 16MB
Initiate Graphic Adapter
This item allows you to enable or disable VGA controller.
Options: PEG/PCI (Default) / IGD / PCI/IGD / PCI/PEG / PEG/IGD
Internal Graphics Mode Select
This item will be different as your memory modules. When the memory size is
decided, this frame buffer size will also be fixed.
Options: Enabled, 32MB (Default) / Enabled,64MB / Enabled,128MB / Disabled
To Next Page
Loading...
Need help?
General
