Biostar MCP6P3 User Manual

Motherboard Manual
2
1.3 MOTHERBOARDFEATURES
SPEC
CPU
Socket AM3
AMD Phenom II/ Athlon II processors
(Maximum Watt: 95W)
AMD 64 Architecture enables 32 and 64 bit computing
Supports Hyper Transport 2.0
FSB
Support HyperTransport 2.0
Supports up to 2.0 GT/s Bandwidth
Chipset
GeForce 6150 SE/nForce 430 (MCP6P3)
GeForce 7025/nForce 630a (N68S3)
Super I/O
ITE 8718F
Provides the most commonly used legacy
Super I/O functionality.
Low Pin Count Interface
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
Main
Memory
DDR3 DIMM Slots x 2
Max Memory Capacity 8GB
Each DIMM supports 512MB/
1GB/2GB/4GB DDR3
Dual Channel Mode DDR3 memory module
Supports DDR3 800 / 1066 / 1333
Registered DIMM and ECC DIMM is not supported
Graphics
GeForce 6150 SE/nForce 430 (MCP6P3)
GeForce 7025/nForce 630a (N68S3)
Max Shared Video Memory is 512MB (under OS)
IDE Integrated IDE Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
SATA II Integrated Serial ATA Controller
Data transfer rates up to 3 Gb/s.
SATA Version 2.0 specification compliant.
LAN Realtek RTL 8201CL
10 / 100 Mb/s auto negotiation
Half / Full duplex capability
Sound ALC662 / VT1708B
5.1 channels audio out
High Definition Audio
PCI Slot x2 Supports PCI expansion cards
Slots
PCI Express x16 Slot x1 Supports PCI-E x16 expansion cards
Floppy Connector x1 Each connector supports 2 Floppy drives
Printer Port Connector x1 Each connector supports 1 Printer port
IDE Connector x1 Each connector supports 2 IDE device
SATA Connector x4 Each connector supports 1 SATA device
On Board
Connector
Front Panel Connector x1 Supports front panel facilities

Biostar MCP6P3 Specifications

General

Brand	Biostar
Model	MCP6P3
Category	Motherboard
Language	English