Bissell 1623 Series User Manual

Before you clean
1. Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning
an entire room (optional).
3. Vacuum area with a dry vacuum cleaner
before deep cleaning.
4. Plan your cleaning route to leave an exit path. It
is best to begin cleaning in the corner farthest
from your exit.
5. Pretreating (optional)
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet in high traffic
areas such as entry ways and hallways.
To pretreat:
A. Using the BISSELL Tough Stain
Pre-cleaner, generously spray evenly
over soiled area, do not overwet.
B. Wait 3-5 minutes before deep cleaning.
C. Clean as normal using your BISSELL deep
cleaner, following the instructions below.
Fill the 2-in-1 water tank
1. Remove the tank from the base of the machine
by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate the handle
forward to unlatch the lid. Remove lid, turn over
and locate built in measuring cup.
3. Fill formula to the indicated fill line on the
built in measuring cup and pour into mouth
of the bladder.
If using BISSELL 3X Concentrate
formulas: add one formula capful directly
into the mouth of the bladder.
4. Fill the bladder with clean hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
7
www.bissell.com 800.237.7691
2
4'
3'
1
3
4
5
6
7
9
10
11
12
EXIT
START
HERE
Operation
1.
2.
4
3.
ug120-4073_1623_908.indd 7 10/14/08 12:59:37 PM

Bissell 1623 Series Specifications

General

Brand	Bissell
Model	1623 Series
Category	Vacuum Cleaner
Language	English

Summary

Safety Instructions

Grounding Instructions

Explains proper electrical grounding for safe operation and risk reduction.

Product View

Cleaning Fluid Recommendations

Lists recommended BISSELL cleaning formulas and their benefits for the machine.

Assembly

Special Features

DirtLifter® PowerBrush

Describes the brush design for enhanced cleaning and carpet grooming.

Ready Tools™™ Dial

Explains the feature to switch between floor and above-floor cleaning.

2-in-1 Water Tank System

Details the design for separate clean and dirty water containment.

Operation

Preparation for Cleaning

Steps to prepare the area and the machine before starting the cleaning process.

Filling the 2-in-1 Water Tank

Instructions on how to fill the clean water and formula into the machine's tank.

Carpet Cleaning Strokes

Step-by-step guide on performing cleaning passes for effective carpet cleaning.

Emptying Tank and Nozzle Cleaning

Procedures for emptying the water tank and cleaning the removable nozzle after use.

Ready Tools™™ Operation

How to use the hose and attachments for various cleaning tasks and operating the feature.

Hard Floor Cleaning

Instructions for using the hard floor tool and formula for cleaning hard surfaces.

Maintenance and Care

Machine Care Procedures

Steps to clean and maintain the deep cleaner after each use for optimal performance.

Machine Storage Guidelines

Proper methods for storing the deep cleaner to prevent damage and ensure longevity.

Troubleshooting

Reduced Spray or No Spray Issues

Identifies causes and solutions for problems with spray function.

Brush or Pump Belt Problems

Addresses issues related to the brush belt or pump belt not turning or being broken.

Cleaner Not Picking Up Solution

Provides remedies for the cleaner failing to pick up water or cleaning solution.

BISSELL Consumer Services

Replacement Parts Information

Lists part numbers and names for ordering replacement components for the machine.

Additional Accessories

Warranty Information