Bissell BARKBATH - User Manual

Questions and Answers

A
Andrea ColeAug 2, 2025
What to do if Bissell BARKBATH has reduced spray or is not spraying?
- R
  rphillipsAug 3, 2025
  If your Bissell Pet Care Product has reduced spray or isn't spraying, consider these possibilities: * The solution or water tank might be empty. Check and refill both the water and bathing tool solution tanks. * The spray tip could be clogged. Rinse the tool with warm water and use a soft bristle brush on the spray tips. * The hose connection might be loose. Ensure the machine hose is locked in place into the bathing tool. Hold the trigger until water comes out. * The unit may have lost prime. Turn the unit off, refill the water tank (and shampoo tank if needed), turn the unit on, and hold the trigger for 20-30 seconds until spray resumes.
S
Steve WhitakerAug 8, 2025
Why is my Bissell BARKBATH Pet Care Product leaking?
- C
  coxmargaretAug 8, 2025
  If your Bissell Pet Care Product is leaking, here are some potential causes: * The dirty water tank gasket might not be in place or is damaged. Place the gasket in correctly (notched). If it's damaged, replace it. * The hose connection could be loose. Ensure the machine hose is locked in place into the bathing tool and hold the trigger until water comes out. * The bathing tool solution cap might not be in place. Make sure the solution cap on the bathing tool is in place with a gasket in the cap.
J
James HartAug 13, 2025
What to do if my Bissell BARKBATH has no power?
- M
  Melissa MejiaAug 13, 2025
  If your Bissell Pet Care Product has no power, check the following: * The outlet might not be working. Test the outlet with a small appliance like a cell phone charger, and use another outlet if needed. * The fuse or breaker to the outlet might be tripped. Reset the breaker.
K
Kristen CombsAug 17, 2025
Why does my dog still smell after using Bissell Pet Care Product?
- C
  Corey JohnsonAug 18, 2025
  If your dog still smells after using the Bissell Pet Care Product, it may be due to a difficult odor (e.g., skunk). Rewash or consult a professional for very difficult odors.
B
Beth FitzgeraldAug 23, 2025
How to fix Bissell BARKBATH when shampoo is not flowing?
- M
  Michael Gardner Jr.Aug 23, 2025
  If the shampoo is not flowing in your Bissell Pet Care Product, here are a few things to check: * Ensure you are using a BISSELL no-rinse dog shampoo; always use a BISSELL no-rinse dog shampoo. * Verify the Rinse/Shampoo switch is fully engaged; make sure the switch is securely selected to the desired function. * The unit may have lost prime. Turn the unit off, refill the water tank (and shampoo tank if needed), turn the unit on, and hold the trigger for 20-30 seconds until spray resumes.
R
Rachael ReyesOct 28, 2025
Why is my Bissell BARKBATH losing suction?
- T
  Tammy LinOct 28, 2025
  There are several reasons why your Bissell Pet Care Product might have reduced or no suction: * There could be hair build-up on the suction nozzle. Clean as needed while washing your dog. * You might be using the tool too far from your pet. Contact your dog's coat and periodically let go of the spray trigger to allow for drying strokes. * The area under the dirty water tank may have sand, hair, or debris. Remove the dirty water tank and clean any sand or debris off the inlet on the base of the machine and the gasket on the bottom of the dirty water tank. * The dirty tank might be full or not seated properly. Empty the tank and replace it, snapping the top lid into place. * There could be a clog or build-up in the hose. Try suctioning hot water up to clear the hose. * The hose...

Summary

IMPORTANT SAFETY INSTRUCTIONS

GROUNDING INSTRUCTIONS

Proper connection of the equipment-grounding conductor for electrical safety.

Whats In The Box?

Before You Get Started

Noise-Sensitive or Anxious Dog?

Quick training tips to help dogs adjust to the new bathing method and reduce anxiety.

Getting to Know Your Cleaner

Assembly

Preparing Your Cleaner

Attaching the Bathing Tool

Bathing Your Dog

Emptying the Dirty Water Tank

Cleaning Your BarkBath After Use

Storing Your BarkBath

Troubleshooting

Warranty

Limited One-Year Warranty

Details the terms, conditions, and duration of the product's limited warranty.

Service

Information on how to obtain repair or maintenance services for the product.

Register your product today!