Black & Decker 20V MAX LST522 User Manual

ENGLISH
14
Two-Year Limited Warranty
For warranty terms, go to https://www.blackanddecker.
com/support/warranty-policy.
To request a written copy of the warranty terms, contact:
Customer Service at Black & Decker, 701East Joppa Road,
Towson, MD 21286or call 1-800-544-6986.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
check country-specific warranty information contained in
the packaging, call the local company or see the website for
suchinformation.
Imported by: Black & Decker (U.S.) Inc.
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
(1-800-544-6986)
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will help
you obtain more efficient warranty service in case there is
a problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
• FOR YOUR SAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer SafetyAct.
• Register online at www.BlackandDecker.com/
NewOwner.
Repairs
The charger and batteries are notserviceable. There are no
serviceable parts inside the charger or batterypack.

WARNING: To assure product SAFETY
and RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a BLACK+DECKER
factory service center or a BLACK+DECKER‑authorized
service center. Always use identical replacementparts.
Replacing Guard (Fig.C, D)

WARNING: Never operate appliance
without guard firmly in place. Damage or personal
injury couldresult.
Remove CurrentGuard
1. Remove the guard screw
15
shown in Fig.D.
2. Slide the guard
10
off.
Assembling the New Guard
1. Slide the guard into place as shown in Fig.C.
2. Replace and securely tighten the guard screw
15
.
Accessories

WARNING: Since accessories, other than
those offered by BLACK+DECKER , have not been tested
with this product, use of such accessories with this
product could be hazardous. To reduce the risk of injury,
only BLACK+DECKER recommended accessories should
be used with thisproduct.
Recommended accessories for use with your product
are available at extra cost from your local dealer or
authorized service center. If you need assistance in locating
any accessory, please contact BLACK+DECKER. Call
1-800-544-6986.
Cleaning

WARNING: Blow dirt and dust out of
all air vents with clean, dry air at least once a week.
To minimize the risk of eye injury, always wear ANSI
Z87.1 approved eye protection when performing
thisprocedure.

WARNING: Never use solvents or other
harsh chemicals for cleaning the non‑metallic parts
of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get
inside the tool; never immerse any part of the tool into
aliquid.
MAINTENANCE

WARNING: To reduce the risk
of serious personal injury, turn unit off and
remove the battery pack before making any
adjustments or removing/installing attachments
or accessories, when replacing line, or prior to
cleaning. An accidental start‑up can causeinjury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regularcleaning.
6. Wind the cutting line onto the spool in the direction of
the arrow on the spool. Make sure to wind the line on
neatly and in layers. Do notcrisscross.
7. When the wound cutting line reaches the recesses
29
,
cut theline.
8. Fit the spool onto the appliance as described in
Replacing SpoolAssembly.

Black & Decker 20V MAX LST522 Specifications

General

Brand	Black & Decker
Model	20V MAX LST522
Category	Trimmer
Language	English