Black & Decker 7190-99 User Manual

ACCESSORIES
The accessories listed in this manual are available at extra cost from your local dealer
or Black & Decker Service Center. A complete listing of service centers is included
on the owner’s registration card packed with your tool.
If you need assistance in locating any accessory, please contact: Black & Decker
(U.S.) Inc., User Services Department, 626 Hanover Pike, P.O. Box 618, Hamp¬
stead, Maryland 21074-0618.
Every Black & Decker tool is of the highest quality. If you wish to contact us regarding this
product, please call toll free between 8:00 a.m. and 5:00 p.m. EST, Monday through Friday.
_ 1-800-762-6672 _
Recommended accessories for use with your Drill are listed below (CAUTION: The
use of any other accessory or attachment might be hazardous). For safety in use,
the following accessories should be used only in the sizes specified below:
BITS. METAL DRILLING — Up to 3/8".
BITS, MASONRY DRILLING — Up to 1/2".
BITS, WOOD DRILLING — Up to 3/4".
HOLE SAWS — Up to 1-1/2"
WIRE BRUSHES — Up to 3" diam.
GRINDING WHEELS — Type I only; up to 2" diameter; up to 1/2" thick.
BUFFING WHEELS — Up to 4" diameter.
BACKING PADS — 4-5/8" diameter.
SANDING DISCS & POLISHING BONNETS — Up to 6" diameter.
Use any Black & Decker consumer drill accessories whose recommended
speed is 3200 RPM or higher.
We strongly recommend that your first purchase be Safety Glasses which
should be worn when using all drill accessories.
CLEANING & LUBRICATION
Use only mild soap and a damp cloth to clean the tool. Many household
cleaners contain chemicals which could seriously damage the plastic.
Also, do not use gasoline, turpentine, lacquer or paint thinner, dry cleaning
fluids or similar products.
Self-lubricating bearings are used in the tool and periodic relubrication
is not required.
COMMERCIAL/INDUSTRIAL USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for one year from date of purchase.
We will repair without charge, any defects due to faulty material or workmanship.
Please return the complete unit, transportation prepaid, to any Black & Decker Ser¬
vice Center or Authorized Service Station listed under ‘‘Tools Electric” in the yellow
pages. This warranty does not apply to accessories or damage caused where repairs
have been made or attempted by others.
See ‘Tools-Electric’
—Yellow Pages—
for Service & Sales
BLACK & DECKER (U.S.) INC.
U.S. Power Tools Group • 10 North Park Drive
P.O. Box 798 • Hunt Valley, MD 21030-0798
Form No. 741225-02 (MAY89-CD-4)
©1989 Black & Decker Printed in U.S.A.

Black & Decker 7190-99 Specifications

General

Brand	Black & Decker
Model	7190-99
Category	Drill
Language	English