10
Storage
When the tool will not be used for several months, wipe
any metal components with oil.
Store the tool in a secure and dry location. The storage
temperature must always remain in the range of + 5 °C to
+ 40 °C. Place the product on a level safe location.
Protecting the environment
Should you find one day that your tool needs
replacement, or if it is of no further use to you, think
of the protection of the environment. Black+
Decker repair agents will accept old Black+ Decker
tools and ensure that they are disposed of in an
environmentally safe way.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local
regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black+ Decker provides a facility for the collection and
recycling of Black+ Decker products once they have reached
the end of their working life. To take advantage of this
service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black+ Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black+ Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Technical data
E
C
declaration of conformity
GK1000/GK1050
Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, EN 60745, EN 55014, EN61000,
EN60335, 2000/14/EC, Chainsaw <
600 W, Annex V
Guaranteed sound pressure level, measured according to
2000/14/EC:
L
pA
(soun
d pressure) 87 dB(A),
L
WA
(acoustic power) 98 dB(A),
L
WA
(guaranteed) 105 dB(A),
hand/arm weighted vibration 2.6 m/s
2
K
pa
(sound pressure uncertainty) 3 dB(A)
K
wa
(acoustic power uncertainty) 3 dB(A)
The Alligator
TM
Lopper is the subject of patent and design
applications in Europe, the United States and other countries
around the world. ALLIGATOR is a trade mark of The Black &
Decker Corporation.
Voltage V
AC
230 230
Power input W 550 600
Chain speed (No-load) m/s 2.3 2.3
Maximum diameter of cut mm 100 100
Weight kg 3 3
GK1000 GK1050
It is normal for a small amount of excess oil to drip from
the chain saw bar and chain during storage. Do not store
chain saw on top of any thing that may be damaged by the
dripping oil.
To clean the tool, use only mild soap and a damp cloth.
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Oiling
Regularly oil the oiling points (15) as indicated in figure B.
Transport
Always transport the tool with the jaws closed.
To Next Page
Loading...
Need help?
General
