11
used by children should be washed
thoroughly before being used again.
MAINTENANCE
If the replacement of the power supply
cord is necessary, it must be done by an
authorized service center or other qualified
service personnel.
CLEANING
WARNING: Blowing dust and grit out
of the motor housing using compressed air
is a necessary maintenance procedure.
Dust and grit from metal grinding often
accumulate on interior surfaces and could
create an electrical shock hazard if not
cleaned out.
Use only mild soap and a damp cloth to
clean the tool. Never let any liquid get
inside the tool; never immerse any part of
the tool into a liquid.
IMPORTANT: To assure product SAFETY
and adjustment (other than those listed
in this manual) should be performed by
authorized service centers or other qualified
service personnel, always using identical
replacement parts.
LUBRICATION
tools are properly
lubricated at the factory and are ready for
use. Tools should be lubricated regularly
every year depending on usage. (Tools used
on heavy duty jobs and tools exposed to
heat may require more frequent lubrication.)
This lubrication should be attempted only
by trained power tool repair person such as
those at
service centers
or in other qualified service personnel.
You can also write to us for information at
Product Service. Be sure to include all of
the information shown on the nameplate
of your tool (model number, type, serial
number, etc.).
ACCESSORIES
WARNING: The use of any accessory
not recommended for use with this tool
could be hazardous.
your tool are available from your local
dealer or authorized service center.
WARNING: Handle and store all
abrasive wheels carefully to prevent
damage from thermal shock, heat,
mechanical damage, etc. Store in a dry
protected area free from high humidity,
freezing temperatures, or extreme
temperature changes.
To Next Page
Loading...
Need help?
General
