Black & Decker CM4500BD User Manual

6
BEFORE BREWING
1. Register your product at www.prodprotect.com/applica
2. Carefully unpack your coffeemaker, removing all packaging materials, labels, and/or
stickers.
3. Remove the plastic band around the power plug using scissors.
4. Clean all removable parts of your coffeemaker in warm, soapy water. Rinse and dry
these parts prior to placing them back into your coffeemaker.
5. To clean the inside of your coffeemaker, run two full brewing cycles using only water,
no coffee.
a. Make sure your coffeemaker is plugged in.
b. Fill the reservoir to the 8 cup mark with fresh, cool water and place
carafe onto the carafe plate.
c. Press the Power button.
d. Once the cycle is finished, discard water.
e. Turn off appliance, unplug and allow to cool down for 15 minutes before
repeating.
USING YOUR CHOICE
OF COFFEE FILTER
• If using a basket shaped coffee filter,
lower both plastic tabs into the brew
basket so they rest horizontally. Place
the basket filter on top of the tabs
inside the brew basket (fig. A).
• If using a cone style filter to brew 8 cups
of coffee, lift both plastic tabs so they
rest flush against the back of the brew
basket. Open a #4 cone filter and place
it directly into the brew basket (fig. B) .
• If using a cone style filter to brew 2 or
4 cups of coffee, lower only the tab
containing an oval shaped cut out
(fig. C). Place a #4 paper cone filter,
folded in half or a #2 cone filter into
the opening in the tab
2
4
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
3
12
17
8
18
fig. A
fig. C
fig. B

Black & Decker CM4500BD Specifications

General

Brand	Black & Decker
Model	CM4500BD
Category	Coffee Maker
Language	English