Need help?Do you have a question about the Black & Decker DN402 and is the answer not in the manual?
Wear protective clothing, maintain balance, avoid kickback, and switch off correctly.
Ensure safe work area, secure workpiece, handle chainsaw correctly, and manage plug/cable.
Details lock-off switch, front hand guard, chain catcher, and short cable for enhanced user safety.
Soak new chains in oil for at least an hour before first use. Use recommended chain oil.
Disconnect power. Clean guide bar groove/oilways. Fit chain correctly onto guide bar.
Fit clamp plate, nut, and tension lever. Ensure chain is seated correctly.
Adjust chain tension lever, tighten clamp nut, and check chain can be pulled smoothly with 3mm clearance.
Covers chain lubrication, oil level checks, and electrical cable selection/switch operation.
Provides guidance on cutting technique, handling jammed chains, and general usage.
Details planning, cutting notches, and using wedges for controlled tree felling.
Explains cutting methods for supported logs, slopes, and limbing techniques.
Outlines frequent chain oiling, cleaning, bar checks, and spindle oiling.
Covers chain/bar replacement, chain sharpening, and depth gauge adjustment.
Lists Black & Decker regional service centres across Australia for repairs and authorized service.
Wear protective clothing, maintain balance, avoid kickback, and switch off correctly.
Ensure safe work area, secure workpiece, handle chainsaw correctly, and manage plug/cable.
Details lock-off switch, front hand guard, chain catcher, and short cable for enhanced user safety.
Soak new chains in oil for at least an hour before first use. Use recommended chain oil.
Disconnect power. Clean guide bar groove/oilways. Fit chain correctly onto guide bar.
Fit clamp plate, nut, and tension lever. Ensure chain is seated correctly.
Adjust chain tension lever, tighten clamp nut, and check chain can be pulled smoothly with 3mm clearance.
Covers chain lubrication, oil level checks, and electrical cable selection/switch operation.
Provides guidance on cutting technique, handling jammed chains, and general usage.
Details planning, cutting notches, and using wedges for controlled tree felling.
Explains cutting methods for supported logs, slopes, and limbing techniques.
Outlines frequent chain oiling, cleaning, bar checks, and spindle oiling.
Covers chain/bar replacement, chain sharpening, and depth gauge adjustment.
Lists Black & Decker regional service centres across Australia for repairs and authorized service.
General| Brand | Black & Decker |
|---|---|
| Model | DN402 |
| Category | Chainsaw |
| Language | English |
To Next Page