Black & Decker Fire Storm FS200SD User Manual

23
PUSH STICK
MAKE FROM 1/2" OR 3/4"
WOOD OR THICKNESS
LESS THAN WIDTH OF
MATERIAL TO BE CUT
CUT OFF HERE TO
PUSH 1/4" WOOD
CUT OFF HERE TO
PUSH 1/2" WOOD
NOTCH TO HELP
PREVENT HAND
FROM SLIPPING
1/2" SQUARES
CONSTRUCTING A PUSH STICK
When ripping work less than 4 inches wide, a push stick should be used to complete the feed and could be easily made
from scrap material by following the pattern shown in Fig. 53.
Fig. 53

Black & Decker Fire Storm FS200SD Specifications

General

Brand	Black & Decker
Model	Fire Storm FS200SD
Category	Saw
Language	English