56
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. Audio sourc-
es can, for example, be portable CD
players, MiniDisc players or MP3 play-
ers.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable (Blau-
punkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
Note:
● If no CD changer is connected, the
AUX input must be activated in the
menu.
Switching the AUX input on/off
➮ Press the MENU button 7.
“MENU” appears in the display.
➮ Press the or button 8 repeat-
edly until “AUX OFF” or “AUX ON”
appears in the display.
➮ Press the or button 8 to
switch AUX on/off.
When you have finished adjusting the
setting,
➮ press the MENU button 7.
Note:
● If the AUX input is activated, you
can select it by pressing the SRC
button =. “AUX INPUT” then
appears in the display.
SPECIFICATIONSEXTERNAL AUDIO SOURCES
Specifications
Amplifier
Output power: 4 x 25 watts sine
in accordance with
DIN 45 324
at 14.4 V
4 x 45 watts max.
power
Tuner
Wavebands in Europe:
FM : 87.5 - 108 MHz
MW: 531 - 1 602 kHz
LW : 153 - 279 kHz
FM frequency response:
35 - 16,000 Hz
CD
Frequency response:
20 - 20,000 Hz
Pre-amp out
4 channels: 2 V
Input sensitivity
AUX input: 2 V / 6 kΩ
Subject to changes!
02Calg/SanDiegoMP35_gb• 09.02.2005, 13:50 Uhr56
To Next Page
Loading...
Need help?
General
