Blaupunkt Monte Carlo MP26 User Manual

51
DANSK
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Cancelling REPEAT
To stop the current track or current CD from
being repeated,
쏅
briefl y press the 4 RPT button :.
"RPT OFF" appears and RPT disappears
on the display.
Random track play (MIX)
To play the tracks on the current CD in
random order,
쏅
briefl y press the 5 MIX button :.
"MIX CD" appears briefl y and MIX lights up
on the display.
To play the tracks on all inserted CDs in
random order,
쏅
press and hold down the 5 MIX button
: for longer than two seconds.
"MIX ALL" appears briefl y and MIX lights
up on the display.
Cancelling MIX
쏅
Briefl y press the 5 MIX button :.
"MIX OFF" appears and MIX on the display
disappears.
Scanning all tracks on all CDs
(SCAN)
To scan (briefl y play) all the tracks on all
the inserted CDs in ascending order,
쏅
press and hold down the MENU button
5 for longer than two seconds.
"TRK SCAN" appears on the display and the
number of the current track fl ashes.
Stopping SCAN
To stop scanning,
쏅
briefl y press the MENU button 5.
The currently scanned track will then con-
tinue to be played normally.
Note:
You can set the scanning time. For fur-
ther information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Interrupting playback (PAUSE)
쏅
Press the button 3
:.
"PAUSE" appears on the display.
Cancelling pause
쏅
During the pause, press the button 3
:.
Playback is continued.
CD-changer mode
02Milano_SRemoMP26_eng.indd 5102Milano_SRemoMP26_eng.indd 51 06.01.2006 13:04:08 Uhr06.01.2006 13:04:08 Uhr

Blaupunkt Monte Carlo MP26 Specifications

General

Brand	Blaupunkt
Model	Monte Carlo MP26
Category	Car Receiver
Language	English