12
EN
Lead the cables out of the socket on the side of the cover and place the solar
panel close by. Connect the water hose to the pump as shown here:
OPERATION
• Switch on the pump by pressing ON briey. It will work for a few hours
depending on the state of charge of the battery and will automatically
switch to solar mode if possible.
• Press and hold the button for 3 seconds to turn off the pump. Now the
battery is automatically charged (in sunlight).
Status LED
• Green = Battery is fully charged. The pump runs for about 6-8 hours in
battery mode.
• Orange = Battery is half-empty. The pump runs about 2-4 hours in battery
mode.
• Red = Battery must be charged. The pump runs for a maximum of 1 hour in
battery mode.
To Next Page
Loading...
Need help?
General
