General information
The side view looks from rear to front and, in
case of danger, focuses automatically on pos-
sible obstacles.
The side view can be selected for the right or
left vehicle side.
Follow the information in the "Parking assis-
tance systems" chapter.
3D view
Principle
When 3D view is selected, a circle is displayed
on the control display.
Specified perspectives can be selected on the
circle.
General information
The current perspective is marked with a cam-
era icon.
To exit the function, select another camera
function in the left toolbar.
Follow the information in the "Parking assis-
tance systems" chapter.
Car wash view
Principle
The car wash view helps when driving into a
car wash.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Turning the car wash view on/off
1.
Press the button.
2. "Car wash"
Display
Your own lane is displayed for easier driving
into a car wash.
Panorama View
Principle
The panoramic view gives you an earlier view
of crossing traffic at blind driveway exits and
intersections.
General information
Road users concealed by obstacles to the left
and right of the vehicle can only be detected
relatively late from the driver's seat. The front
camera and the rearview camera capture the
area around the side of the vehicle to improve
the view.
The camera image shows different levels of
distortion in some areas and is thus not suita-
ble for distance estimations.
Depending on vehicle equipment, the function
can be used when driving forward or in re-
verse.
Follow the information in the "Parking assis-
tance systems" chapter.
Sensors
The system is controlled by the following cam-
eras:
▷
Rearview camera.
▷ Front camera.
Seite 203
Parking
CONTROLS
203
Online Edition for Part no. 01405A5E788 - VI/22
To Next Page
Loading...
Need help?
General
