Technical data
Vehicle features and
options
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features and functions that are
not necessarily available in your vehicle, e.g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be ob‐
served.
General information
The technical data and specifications in the
Owner's Manual are used as guidance values.
The vehicle-specific data can deviate from this,
for instance due to the selected optional equip‐
ment, country version or country-specific meas‐
uring procedure. Detailed values can be found in
the approval documents, on labels on the vehicle
or can be obtained from a dealer’s service center
or another qualified service center or repair shop.
Dimensions
The dimensions can vary depending on the
model version, equipment version or country-
specific measurement procedure.
The height of the vehicle can also differ, e.g. due
to tires and vehicle load.
BMW 2er Gran Coupé
Width with mirrors in/mm 81.9/2,081
Width without mirrors in/mm 70.9/1,800
Height in/mm 55.9/1,420
Length in/mm 178.5/4,534
Wheelbase in/mm 105.1/2,670
Smallest turning radius diam. ft/m 37.4/11.4
Seite 328
REFERENCE
Technical data
328
Online Edition for Part no. 01405A37F24 - VI/21
To Next Page
Loading...
Need help?
General
