173
EntertainmentReference At a glanceControlsDriving tipsCommunications NavigationMobility
Mounting/removing snap-in
adapter
1. Press the area 1 around the button and
remove the cover.
2. Insert the snap-in adapter at the front and
press down until it engages.
To remove the snap-in adapter:
Press the area 1 around the button.
Inserting mobile phone
1. Remove the protective cap from the mobile
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.
2. With the keys facing upward, press the
mobile phone toward the electrical connec-
tions and press down until it engages.
The mobile phone's battery is charged with the
ignition switch at radio readiness or higher or
with the steering unlocked.
To protect the vehicle's batteries, avoid
using the phone when the ignition is
switched off.<
Removing mobile phone
Press button.
Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG
To Next Page
Loading...
Need help?
General
