Controls
83
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
Activating hour signal*
You will hear three tones just before each full
hour.
Select "Hour memo" and press the controller.
The hour signal is activated.
Setting time format
1. Select "Time format" and press the control-
ler.
2. Select the desired format and press the
controller.
The setting is stored for the remote control cur-
rently in use.
Setting date
1. Select "Date" and press the controller.
2. Select "Set date" and press the controller.
The first section of the date display is high-
lighted, in this case the month
3. Turn the controller to make the adjustment.
4. Press the controller to apply the setting.
The next adjustment is highlighted.
5. Make the remaining adjustments. After the
last adjustment, the date is stored.
Changing date format
1. Select "Date format" and press the control-
ler.
2. Select the desired format and press the
controller.
The setting is stored for the remote control cur-
rently in use.
Brightness of Control Display
The brightness is automatically adapted to the
ambient lighting conditions. However, you can
change the base setting.
1. Select "Brightness" and press the control-
ler.
2. If necessary, move the controller to the right
to select "Display".
3. Turn the controller until the desired setting
is selected.
The setting is stored for the remote control cur-
rently in use.
Units of measure
You can change the units of measure for fuel
consumption, distances, temperature and
pressure.
1. Select "Units" and press the controller.
2. Select the menu item to be set.
3. Press the controller.
4. Select the desired unit of measure and
press the controller.
The settings are stored for the remote control
currently in use.
Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG
To Next Page
Loading...
Need help?
General
