Controls
67
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
5. Select the speed value and press the con-
troller.
6. Turn the controller to set the limit. If neces-
sary, hold it against a slight resistance to
enter a greater difference.
7. Press the controller to apply the setting.
The limit is automatically switched on.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system applies your current
speed as the limit.
Activating limit
Select "On" and press the controller.
The limit is automatically switched on.
Stopwatch
iDrive, for explanation of principle, refer to
page 16.
1. Open the start menu.
2. Open "Navigation".
Without navigation system
*
: open "Car
Data".
3. Select "Car Data" and press the controller.
4. Select "Stopwatch" and press the control-
ler.
Starting, stopping, or resetting
> Select "Start" and press the controller.
The stopwatch starts at the displayed time.
> Select "Reset" and press the controller.
The stopwatch is reset and it restarts if it
was running beforehand.
> Select "Stop" and press the controller.
This stops the timer.
Taking an intermediate time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
All of the remaining functions remain
available at all times while the stopwatch
is running. The stopwatch continues to operate
in the background.<
Settings on Control Display
iDrive, for explanation of principle, refer to
page 16.
1. Press the button once or twice until
the start menu appears.
2. Press the controller to open the menu.
Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG
To Next Page
Need help?
General
