Controls Overview
76
3. "Service required"
4. "§ Vehicle inspection"
5. Open the menu for entering the deadline.
6. "Date:"
7. Turn the controller until the desired month
is displayed, and then press the controller.
8. Set the year in the same manner.
The date is stored.
To exit the menu:
Move the controller to the left.
More information on the BMW Maintenance
System can be found on page 206.
Automatic Service Request*
Data regarding the maintenance status or
legally mandated inspections of the vehicle are
automatically transmitted to your BMW center
prior to a service due date.
You can check when your BMW center was
notified.
iDrive, for operating principle refer to page 16.
1. "Vehicle Info"
2. "Vehicle status"
3. "Options"
4. "Last Service Request"
Clock
The settings are stored for the remote control
currently in use, refer also to Personal Profile on
page 26.
Setting the time
To set the 12h/24h mode, refer to Setting the
time format below.
iDrive, for operating principle refer to page 16.
1. Press the MENU button.
The main menu is displayed.
Online Edition for Part no. 01 41 2 602 716 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 716 - © 08/09 BMW AG
To Next Page
Loading...
Need help?
General
