Displaying and using the list
Button Function
Change the entertainment
source.
Pressing the button again will
close the currently displayed
list.
Show list of most recent tele‐
phone calls.
Turn the thumbwheel to select
the desired setting.
Press the thumbwheel to con‐
firm the setting.
The currently selected list can
be displayed in the instrument
cluster by turning the thumb‐
wheel.
Trip data
Concept
Values for the trip, such as the average con‐
sumption or trip miles, are displayed.
General information
The trip data can be displayed on the Control
Display and in the instrument cluster.
The values can be displayed and reset depend‐
ing on various intervals, such as after refueling.
Display on the Control Display
Overview
The following information is displayed based on
the configured interval:
▷ Configured interval for displaying trip data.
▷ Average fuel consumption depending on the
configured interval.
▷ Average speed.
▷ Total time for shut off engine through the
Auto Start/Stop function.
▷ Distance traveled in Coasting mode.
▷ Consumption history in form of a chart.
Displays
1. "CAR"
2. "Driving information"
3. "Trip data"
Consumption history
The average consumption is shown in the con‐
sumption history in form of a chart based on the
distance traveled and the driving mode.
Display in the instrument cluster
Depending on the equipment, information about
the route can be displayed as widget in the in‐
strument cluster.
The following information is displayed:
▷ Total mileage.
▷ Configured interval for displaying trip data.
▷ Distance traveled depending on the config‐
ured interval.
▷ Average speed.
Selecting and setting widgets in the instrument
cluster.
Additional information:
Instrument cluster with enhanced features:
Widgets in the instrument cluster, refer to
page 146.
Instrument cluster without enhanced features:
Widgets in the instrument cluster, refer to
page 147.
Seite 162
CONTROLS
Displays
162
Online Edition for Part no. 01405A111C1 - VI/20
To Next Page
Loading...
Need help?
General
