On the move
Driving
Drive-ready state
Switching on drive-ready state
▷ Depress the brake pedal.
▷ With manual gearbox: press
clutch and engage neutral.
▷ Press the start/stop button.
Switching off drive-ready state
Manual gearbox:
1.
Press the Start/Stop button when the vehicle
is at standstill.
The engine is switched off.
2. Engage first gear or reverse.
3. Apply the parking brake.
Steptronic transmission:
1.
With the vehicle at a standstill, engage selec‐
tor lever position P.
2. Press the start/stop button.
The engine is switched off.
3. Apply the parking brake.
Auto Start Stop function
The Auto Start Stop function switches the en‐
gine off automatically at a standstill to save fuel.
For driving off, the engine automatically starts
under the following conditions:
Manual gearbox:
▷ By pressing the clutch pedal.
Steptronic transmission:
▷ By releasing the brake pedal.
▷ With Automatic Hold activated: press the ac‐
celerator pedal.
Parking brake
Engaging
Pull the switch.
LED and indicator lamp are illuminated.
Releasing
With drive-ready state switched on:
Steptronic transmission: press the switch
with the brake pedal depressed or selector lever
position P engaged.
Manual transmission: press the button with the
brake pedal depressed.
LED and indicator lamp turn off.
The parking brake is released.
Parking
The parking brake is automatically applied when
the vehicle is held by Automatic Hold and the
drive-ready state is switched off or the vehicle is
exited.
Manual gearbox
Shifting gears
When shifting into a lower gear, high engine
speeds can damage the engine. There is a risk of
material damage. Push the shift lever to the right
while shifting into the 5th or 6th gear.
Reverse gear
Engage this position only when the vehicle is sta‐
tionary.
To overcome the resistance, move the shift lever
firmly to the left towards the left and engage the
reverse gear with a gear shift movement for‐
wards.
Seite 30
QUICK REFERENCE
On the move
30
Online Edition for Part no. xxx - VI/19
To Next Page
Loading...
Need help?
General
