Playing and managing recordings
Saved video recordings can be played, exported
and deleted.
For your own safety, the recording is only shown
at the front if the speed is below approximately
3 km/h, approx. 2 mph. In the case of some na‐
tional-market versions, the recording is only
shown with the parking brake applied or with the
selector lever in position P.
Via iDrive:
1. "Apps"
2. "Drive Recorder"
3. "Saved recordings"
4. Select the desired recording.
5. Select the desired setting:
▷ "Play"
▷ "Pause"
▷ "Export"
▷ "Delete"
If the cameras switched during the recording, it is
possible to select various video sections.
Settings
General
Various settings can be made.
Recording type
Via iDrive:
1.
"Apps"
2. "Drive Recorder"
3. "Settings"
4. "RECORDING TYPE"
5. Select the desired setting.
▷ "Manually"
▷ "Automatically"
Recording duration
Via iDrive:
1. "Apps"
2. "Drive Recorder"
3. "Settings"
4. Select the desired setting:
▷ "Before trigger"
Recording duration before an event.
▷ "After trigger"
Recording duration after an event.
Cameras
Via iDrive:
1.
"Apps"
2. "Drive Recorder"
3. "Settings"
4. "Camera selection"
5. Select the desired camera.
System limits
In the event of a serious accident, recordings
may not be saved if, for example, the damage to
the vehicle is too extensive or the power supply
was interrupted.
Active Protection
Principle
In critical driving or collision situations, Active
Protection prepares the vehicle occupants and
the vehicle for a potential imminent accident.
General
Active Protection consists of different PreCrash
functions which may vary depending on the
equipment installed.
The system detects critical driving situations
which could potentially lead to an accident. Such
situations include:
Seite 225
Safety
CONTROLS
225
Online Edition for Part no. xxx - VI/19
To Next Page
Loading...
